Partitions

Home Partitions
Partitions

"F" Series Systems

  • Made from Recycled Materials

  • Robust – Severe Rating

  • Fire Resistant Up To 3 Hours

  • High Acoustic Properties

  • High Lateral Strength

  • Speedy Installation

  • Only One Type of Board Needed

  • No Need For Plywood Backing

  • No Wet Trades Required

  • Wall heights up to 26m High

Step 1: Select Product
  • - 2 x 12.5 mm Robust Performance Board
  • - 2 x 12.5 mm Robust Performance Board
  • - 75 mm Mineral Wool Insulation
  • - 4 x 12.5 mm Robust Performance Board
  • - 75 mm Mineral Wool Insulation
  • - 6 x 12.5 mm Robust Performance Board
  • - 75 mm Mineral Wool Insulation
Step 2: Choose Your Finish

Industrial

  • PJS Robust Performance Boards close jointed fixed to stud section with screws embedded into PJS Robust Performance Boards
  • Screws heads filled approximately same colour as board
  • Perimeters / penetrations sealed with Fire Sealant
  • Can be painted if required
  • Suitable for industrial / commercial applications

Note: An “Industrial Painted” finish is available as above but with one or 2 coats of emulsion depending on colour selection.

Smooth

  • PJS Robust Performance Boards glued at edges with Joint Stick
  • Joint stick taken back flush to board surface
  • Screws filled / board joints smoothed
  • Application of Smooth Surface Treatment
  • Suitable for offices / commercial / health / education buildings
  • Can be painted if required
  • Perimeters / penetrations sealed with Fire Sealant

Painted

  • PJS Robust Performance Boards glued at edges with Joint Stick
  • Joint stick taken back flush to board surface
  • Screws filled / board joints smoothed
  • Application of Smooth Surface Treatment
  • Suitable for offices / commercial / health / education buildings
  • Painted with 2 coats of emulsion
  • Perimeters / penetrations sealed with Fire Sealant
Step 3: Order

Thanks! … please Call or Email us to discuss your order. Please read our Order Page first.